Pass Exam Questions Efficiently With HPE2-T37 Questions (2023) [Q28-Q43]

Pass Exam Questions Efficiently With HPE2-T37 Questions (2023)

HPE2-T37 Questions - Truly Beneficial For Your HP Exam

NEW QUESTION 28
Refer to the exhibit.

Which statement about the logical interconnect shown is true?

A. The maximum supported number of the internal networks for logical interconnect is configured.
B. For FC uplink sets, an additional uplink from second module should be added for redundancy.
C. FC uplinks are not supported and will be converted to FCoE or RoCE uplinks.
D. Additional uplink ports can be added to ETH-Uplink to increase available bandwidth.

Answer: C

NEW QUESTION 29
Which statement about the presented storage pools is true?

A. Storage pools in discovered state can be removed from HPE OneView.
B. All storage pools in managed state have a valid HPE OneView license applied
C. All storage pools from the system named ThreePAR-1 can be used for volume provisioning
D. HPE OneView can be used to configure replication only between managed storage pools

Answer: C

NEW QUESTION 30
You plan to update HPE OneVew to the latest version
What Should you do Mora starting HPE OneView update?

A. Create a support dump for the appliance and for all managed logical interconnects
B. Disable HPE Remote Support at toe HPE OneView appliance level
C. Run the Update Readiness checker tool to evaluate HPE OneView health status
D. Put all servers managed through HPE OneView to maintenance state

Answer: C

NEW QUESTION 31
Which licenses are optional to be purchased separately for HPE Synergy?

A. Virtual Connect licenses
B. HPE OneView licenses
C. Global Dashboard licenses
D. FC Upgrade licenses

Answer: D

Explanation:
Licenses were not purchased in the original order for the modules and were ordered separately.

NEW QUESTION 32
You try to add a new connection within a server profile, but an operation fails when you try to commit the changes.
What is a possible reason?

A. The server is powered off
B. The server is powered on
C. The server does not have an HPE OneView license applied
D. You tried to add additional connection above the limit

Answer: B

NEW QUESTION 33
You try to add an HPE Primera array to HPE OneView, but you get a connectivity error. However, you can connect to the array using SSMC. What should you verify before adding HPE Primera to HPE OneView?

A. whether there are at least two Fibre Channel networks defined in HPE OneView.
B. whether array management using HPE OneView is enabled in SSMC.
C. whether WSAPI service is enabled on HPE Primera array.
D. whether the appropriate license for HPE Primera Is available in HPE OneView.

Answer: C

NEW QUESTION 34
Your workload profile in the BIOS. All of the servers are managed using HPE OneView.
How can this task be completed?

A. Set a specific workload profile within server profile template and update all profiles.
B. Set a specific workload profile using IL0 interface for each individual server.
C. Set a specific workload profile for all managed servers as an HPE OneView global setting.
D. Set a specific workload profile within Logical Interconnect Group and update all servers.

Answer: A

NEW QUESTION 35
How will setting the Purpose field within the network definition of a server profile impact the network traffic?

A. network purpose can give higher priority for a specific type of traffic
B. network purpose will define QoS within Logical Interconnect
C. network purpose does not affect the behavior of the network
D. network purpose will impact the traffic only if Virtual Connect modules are used

Answer: B

NEW QUESTION 36
You configured downlink aggregation for one of the HPE Synergy Compute Modules in an environment by placing two connections in the same Link Aggregation Group. After you made the changes to the server profile, its status changed to critical.
What can be done to fix this issue?

A. The server profile for a given HPE Synergy compute module should be reapplied, then the Compute Module should be rebooted.
B. Ensure that the Link Aggregation Group time-out value matches the server set values.
C. Link Aggregation Group functionality should be enabled in advanced properties of the Logical Interconnect.
D. The teaming or bonding driver in the server OS must be configured to enable the LACP and to form the LAG correctly.

Answer: C

NEW QUESTION 37
Within HPE OneView you can configure SNMPv1 read community string.
What is the purpose of this feature?

A. This is an SNMP community string that will be used when traps are forwarded to other SNMP applications
B. This is an SNMP community string that will be used to receive a trap's SNMP Agent
C. This is an SNMP community string that will be used to receive traps from HPE Onboard Administrators
D. This is an SNMP community string that will be used when traps are forwarded to a WBEM Provider

Answer: B

NEW QUESTION 38
Refer to the exhibit.

Your customer created multiple networks in HPE OneView, but only Eth-1 is available to be used within a server profile. What is a likely cause of this situation?

A. The other networks have Private Network' selected, which hides them from Compute Modules.
B. The other networks are not configured with the required Smart Link parameter.
C. The other networks are not added to the Logical Interconnect Group configuration.
D. The other networks are configured with a purpose other than General or Management.

Answer: A

NEW QUESTION 39
Click option that will allow you to select a FlexNIC function for the specified connection.

Answer:

Explanation:

NEW QUESTION 40
Click the option that will allow you to update the firmware of master and satellite modules.

Answer:

Explanation:

NEW QUESTION 41
Your customer has an environment with five HPE Synergy Composers and 15 HPE OneView appliances managing servers that run VMware. The customer is having a hard time managing their servers.
What can the customer do to simplify management of this complex environment?

A. deploy HPE OneView for VMware vCenter Server
B. integrate all HPE OneView appliances and HPE Composers with Active Directory
C. deploy HPE OneView Global Dashboard
D. use an Ansible playbook

Answer: A

NEW QUESTION 42
Which statement about managing an HPE BiaoeSystem sever is true?

A. Both c3000 and C7000 HPE BladeSystems enclosures can be imported to HPE Oneview for monitoring
B. An HPE server blade can be removed trom HPE OneView by deleting the server from the Server Hardware section
C. A muiti-enclosure Vrtuai Connect domain can be imported to HPE OneView without disrupting servers
D. An HPE server blade cannot be deleted from HPE OneView It must be physically removed from the enclosure

Answer: B

NEW QUESTION 43
......