[Feb-2023] Updated HP HPE2-T37 Dumps – PDF & Online Engine
HPE2-T37.pdf - Questions Answers PDF Sample Questions Reliable
The most appropriate way to get ready for the HP HPE2-T37 Certification Exam
Getting prepared for the HP HPE2-T37 Certification Exam is not much harder if you follow the right path. The path that you should follow to get ready for the HP HPE2-T37 Certification Exam is given below.
The candidates should start preparing for the HP HPE2-T37 Certification Exam at least 2 months before the exam date. They should go through the syllabus of the HPE2-T37 Exam. The candidates should read the study materials, such as the HPE2-T37 Dumps and Study material, which is provided by the HP. After that, the candidate needs to manage the time properly. They should have the proper focus. The candidates should have a proper study plan, to prep for the HPE2-T37 Exam. They should have a proper sleep schedule. They should follow a proper diet plan. They should keep a record of their daily activities. In the end, it is recommended to practice a lot for the HP HPE2-T37 Certification Exam.
NEW QUESTION 40
What step must be taken to add an HPE SuperDome Flex to an existing OneView environment
- A. HPE Superdome Flex can be added to HPE OneView after at least one nPAR is created.
- B. HPE Superdome Flex complex can be added by adding base chassis of this complex.
- C. A Rack Management Controller must be added to HPE OneView.
- D. Each HPE Superdome Flex chassis must be added Individually using BMC IP.
Answer: C
NEW QUESTION 41
Your customer runs VMware ESXi on an HPE Synergy platform. The ESXi systems must have access to 50 VLANs initially. However, this is a dynamic environment, and more VLANs will be added in the future.
They want to add more networks for virtual machines, but they do not want to modify the HPE Virtual Connect configuration.
Which type of the network should the customer define?
- A. Untagged
- B. Internal
- C. Tunnel
- D. Tagged
Answer: D
Explanation:
Virtual Connect will pass through all tagged packets without modification, and it will be the responsibility of the teaming software to strip/add tags.
NEW QUESTION 42
Click the option that must be configured for an HPE OneView when an HPE storage system is connected directly to an HPE Synergy frame.
Answer:
Explanation:
NEW QUESTION 43
Which HPE components can be managed using HPE Composer? (select two.)
- A. HPE Synergy 480 Compute Modules
- B. HPE B-series SN6600B Fibre Channel Switch
- C. HPE Synergy Virtual Connect SE 32Gb FC Module
- D. HPE MSA 2062 Storage Array
- E. HPE Superdome Flex 280
Answer: B,C
NEW QUESTION 44
Your workload profile in the BIOS. All of the servers are managed using HPE OneView.
How can this task be completed?
- A. Set a specific workload profile within server profile template and update all profiles.
- B. Set a specific workload profile within Logical Interconnect Group and update all servers.
- C. Set a specific workload profile for all managed servers as an HPE OneView global setting.
- D. Set a specific workload profile using IL0 interface for each individual server.
Answer: A
NEW QUESTION 45
You plan to update HPE OneVew to the latest version
What Should you do Mora starting HPE OneView update?
- A. Put all servers managed through HPE OneView to maintenance state
- B. Create a support dump for the appliance and for all managed logical interconnects
- C. Run the Update Readiness checker tool to evaluate HPE OneView health status
- D. Disable HPE Remote Support at toe HPE OneView appliance level
Answer: C
NEW QUESTION 46
You want a server profile to be automatically applied when an HPE Synergy Compute Module is replaced.
Click the appropriate configuration option.
Answer:
Explanation:
NEW QUESTION 47
Your customer added HPE Primera to HPE OneVlew and enabled volume provisioning on all storage pools.
For security reasons, the customer wants to disable volume provisioning using HPE OneView on a specific storage pool.
How can this task be completed?
- A. The storage pool should be disabled using the array management tool.
- B. The storage pool should be removed from HPE OneView using a PowerShell script.
- C. The storage pool should be marked as read-only using HPE OneView.
- D. The storage pool state should be changed to discovered using HPE OneView.
Answer: A
NEW QUESTION 48
Within HPE OneView you can configure SNMPv1 read community string.
What is the purpose of this feature?
- A. This is an SNMP community string that will be used to receive traps from HPE Onboard Administrators
- B. This is an SNMP community string that will be used when traps are forwarded to other SNMP applications
- C. This is an SNMP community string that will be used to receive a trap's SNMP Agent
- D. This is an SNMP community string that will be used when traps are forwarded to a WBEM Provider
Answer: C
NEW QUESTION 49
Refer to the exhibit.
Your customer wants to define a Logical Interconnect Group (UG) and set the redundancy of the master modules to highly available, but this option is not available. What is a possible reason?
- A. There are not sufficient frames for highly available setup.
- B. A dedicated license must be added to HPE OneView to enable this feature.
- C. Firmware on the master modules is too low to support highly available setup.
- D. Some master modules only support a redundant setup.
Answer: D
NEW QUESTION 50
You originally configured boot mode for HPE ProLiant Gen10 server to 'Legacy BIOS' in an HPE OneView server profile and deployed an operating system. A few weeks later, you change the boot mode to the 'UEFI optimized' to leverage some features provided by this mode.
What must you do next?
- A. reset an il_0 management processor to activate the new boot mode for the server
- B. reset BIOS settings to the defaults so UEFI settings can be applied
- C. reinstall an operating system, as UEFI is using different drive format than Legacy BIOS
- D. reset BIOS settings to the defaults through the server profile after changing the boot mode
Answer: A
NEW QUESTION 51
Refer to the exhibit.
Which statement about the logical interconnect shown is true?
- A. Additional uplink ports can be added to ETH-Uplink to increase available bandwidth.
- B. For FC uplink sets, an additional uplink from second module should be added for redundancy.
- C. FC uplinks are not supported and will be converted to FCoE or RoCE uplinks.
- D. The maximum supported number of the internal networks for logical interconnect is configured.
Answer: C
NEW QUESTION 52
Refer to the exhibit.
After adding SAN Manager to HPE OneView. you noticed that all SANs are in the discovered state. How will this affect HPE OneView storage management capabilities?
- A. Volume presentation through server profile will work with the discovered state.
- B. Snapshot functionality will be limited only to the volumes not using these SANs.
- C. Volume provisioning will only work for arrays that ate accessible through these SANs.
- D. Auto-zoning functionality will not work until SANs are associated with networks.
Answer: A
NEW QUESTION 53
Refer to the exhibit.
Your customer created multiple networks in HPE OneView, but only Eth-1 is available to be used within a server profile. What is a likely cause of this situation?
- A. The other networks are configured with a purpose other than General or Management.
- B. The other networks have Private Network' selected, which hides them from Compute Modules.
- C. The other networks are not configured with the required Smart Link parameter.
- D. The other networks are not added to the Logical Interconnect Group configuration.
Answer: B
NEW QUESTION 54
Which statement regarding HPE OneView backup restore is true?
- A. During backup restore, users with Administrator privileges can still login to HPE OneView
- B. An HPE OneView backup can be used to restore individual components like server profile
- C. Users with Backup Administrator privileges can restore an HPE OneView backup
- D. Only users with Infrastructure Administrator privileges can restore an HPE OneView backup
Answer: D
Explanation:
Only an Infrastructure administrator can restore an appliance from a backup file.
NEW QUESTION 55
Which statement about a server profile for an Apollo system is true?
- A. UEFI optimized is the only available boot mode
- B. Virtual WWNs and MAC addresses can be defined
- C. Enclosure Group Is automatically selected
- D. Fibre Channel connections can be defined
Answer: D
NEW QUESTION 56
Which statement about the volume template is true?
- A. Users will be able to select storage pool during volume creation
- B. Users will be able to change sharing type and volume capacity
- C. A volume created using this template mil not support snapshots
- D. A volume created using this template will not support deduplication
Answer: B
NEW QUESTION 57
Refer to the exhibit.
Your customer created multiple networks in HPE OneView, but only Eth-1 is available to be used within a server profile. What is a likely cause of this situation?
- A. The other networks are configured with a purpose other than General or Management.
- B. The other networks have Private Network' selected, which hides them from Compute Modules.
- C. The other networks are not configured with the required Smart Link parameter.
- D. The other networks are not added to the Logical Interconnect Group configuration.
Answer: B
NEW QUESTION 58
For HPE Primera, match each task with the management tool that can be used to perform it.
Answer:
Explanation:
NEW QUESTION 59
Your customer wants to optimize GenlO servers for a virtualization workload by configuring all of them with a specific workload profile in the BIOS. All of the servers are managed using HPE OneView.
How can this task be completed?
- A. Set a specific workload profile for all managed servers as an HPE OneView global setting.
- B. Set a specific workload profile within Logical Interconnect Group and update all servers.
- C. Set a specific workload profile using IL0 interface for each individual server.
- D. Set a specific workload profile within server profile template and update all profiles.
Answer: A
NEW QUESTION 60
You want to add the latest IL0 firmware to an HPE OneView firmware repository. How can you complete this task?
- A. A custom SPP iso Image must be created with the new IL0 firmware version and uploaded to the repository.
- B. An external repository must be created, because standalone components are supported only In an external repository.
- C. A PowerShell script must be used to upload IL0 firmware to the Internal or external firmware repository.
- D. ILO firmware can be marked as a hotnx and uploaded directly to the Internal or external firmware repository.
Answer: A
NEW QUESTION 61
How can your customer implement HPE OneView so that it can be used to manage an HPE ProLiant server and HPE BladeSystem?
- A. As an application running on the server with Windows system.
- B. As a virtual appliance running on the supported hypervisor.
- C. As a physical appliance based on HPE ProLiant 360 Gen 10.
- D. As an application running on the server with CentOS Linux system
Answer: C
NEW QUESTION 62
Refer to the exhibit.
You discovered that one of the profiles is not compliant with the server profile template. What could cause this profile to be inconsistent with the server profile template?
- A. HPE OneView was restored from a backup that created inconsistency with the server profile template.
- B. Changes to the server profile were implemented directly on the server profile.
- C. Network connectivity for HPE Synergy Compute Module was changed outside HPE OneView.
- D. The server was powered off or rebooted recently and IL0 did not reconnect to HPE OneView.
Answer: C
NEW QUESTION 63
Which components require an HPE OneView license for management?
- A. HPE Virtual Connect modules
- B. Brocade and Cisco SAN Manager
- C. HPE Apollo XL 170r
- D. HPE Primera and HPE 3PAR
Answer: A
NEW QUESTION 64
......
What is the current and future scope of the HP HPE2-T37 Certification Exam?
The HPE2-T37 Exam has a vast scope and is highly demanded. To illustrate this point, let's look at the trends. The graph shows that the demand for the HPE2-T37 certification exam is on the rise. In the last five years, the HPE2-T37 certification has been increasing by 20% every year. Moreover, it has increased by 27% in the last two years. This is because the number of jobs in the IT sector has been increasing. Later, the candidates who take the HP HPE2-T37 Certification Exam will get an edge over their competitors. HPE2-T37 Dumps has shared all the info about the current and future scope of the HPE2-T37 Certification Exam.
HP HPE2-T37 Dumps PDF Are going to be The Best Score: https://www.itexamdownload.com/HPE2-T37-valid-questions.html
HPE Product Certified - OneView [2022] HPE2-T37 Exam and Certification Test Engine: https://drive.google.com/open?id=1zQaArVVsYlXFww4aW5JpSc_3RR29o3PS