New 2021 Guaranteed Success with ITExamDownload HPE2-T37 Dumps HP PDF Questions
Exceptional Practice To Using HPE OneView Pass the First Time
NEW QUESTION 24
Which components require an HPE OneView license for management?
- A. HPE Virtual Connect modules
- B. HPE Primera and HPE 3PAR
- C. Brocade and Cisco SAN Manager
- D. HPE Apollo XL 170r
Answer: A
NEW QUESTION 25
Which statement about a Logical Enclosure for HPE BladeSystem is Hue?
- A. A logical enclosure must be created only for monitored HPE BladeSystem C700O enclosures.
- B. A logical enclosure can contain a mix of HPE BladeSystem c7000 and C3000 enclosures.
- C. A logical enclosure is created automatically, and it is always based on a single enclosure.
- D. A logical enclosure can have between 1 to 5 HPE BladeSystem c7000 enclosures.
Answer: C
NEW QUESTION 26
What is the best practice when deploying an HPE OneView appliance?
- A. Enable VMware Fault Tolerance if the appliance is deployed to a VMware hypervisor.
- B. deploy the appliance in a hypervisor cluster that Is not managed by OneView.
- C. Use thin-provisioning for the HPE OneView appliance to save storage capacity.
- D. Deploy two HPE OneView appliances and configure them in HA mode.
Answer: B
NEW QUESTION 27
Which types of support dump can be created using HPE OneView? (Select two.)
- A. Logical enclosure support dump
- B. Maintenance console support dump
- C. Firmware deployment support dump
- D. Appliance support dump
- E. Enclosure group support dump
Answer: A,B
NEW QUESTION 28
You want to put two FlexNlCs into a single Link Aggregation Group within a server profile. What Is a prerequisite for this setup?
- A. The Compute Module profile must have exactly two connections defined.
- B. Both FlexNlCs must be connected to the same network.
- C. An upgrade license must be purchased and deployed.
- D. The sFlow option must be enabled and configured.
Answer: D
NEW QUESTION 29
Your customer asks you if it is possible to perform HPE Synergy initial setup remotely. How should you respond?
- A. Remote HPE Synergy setup is possible if HPE Composer 2 is used and a DHCP server Is available in the management network.
- B. Remote HPE Synergy Installation can be done only if an additional set of the services was purchased together with hardware platform.
- C. HPE Synergy can be configured remotely through a secure connection to the FLM if this option was enabled In the factory.
- D. HPE Synergy cannot be deployed remotely, as Initial setup must be performed using a local console connection.
Answer: C
NEW QUESTION 30
Refer to the exhibit.
Your customer wants to define a Logical Interconnect Group (UG) and set the redundancy of the master modules to highly available, but this option is not available. What is a possible reason?
- A. There are not sufficient frames for highly available setup.
- B. Firmware on the master modules is too low to support highly available setup.
- C. Some master modules only support a redundant setup.
- D. A dedicated license must be added to HPE OneView to enable this feature.
Answer: C
NEW QUESTION 31
Which HPE components can be managed using HPE Composer? (select two.)
- A. HPE Synergy Virtual Connect SE 32Gb FC Module
- B. HPE MSA 2062 Storage Array
- C. HPE B-series SN6600B Fibre Channel Switch
- D. HPE Synergy 480 Compute Modules
- E. HPE Superdome Flex 280
Answer: A,C
NEW QUESTION 32
Which statement about access to HPE Onboard Administrator is true when an HPE BladeSystem enclosure is added to HPE OneView?
- A. It is enabled only when an HPE BladeSystem enclosure is monitored using HPE OneView.
- B. It is blocked when an HPE BladeSystem enclosure is managed using HPE OneView.
- C. It is enabled when an HPE BladeSystem is either managed or monitored using HPE OneView.
- D. It is blocked when HPE BladeSystem enclosure is monitored using HPE OneView.
Answer: A
NEW QUESTION 33
You want to add the latest IL0 firmware to an HPE OneView firmware repository. How can you complete this task?
- A. An external repository must be created, because standalone components are supported only In an external repository.
- B. A custom SPP iso Image must be created with the new IL0 firmware version and uploaded to the repository.
- C. ILO firmware can be marked as a hotnx and uploaded directly to the Internal or external firmware repository.
- D. A PowerShell script must be used to upload IL0 firmware to the Internal or external firmware repository.
Answer: A
NEW QUESTION 34
Your customer is considering HPE Synergy as a hardware platform for visualization workload. The customer environment is wry dynamic, and they often have to modify hypervisor networking.
Which resource provided by HPE should you discuss with this customer?
- A. HPE Image Streamer provides templates which can be updated to map the hypervisor requirements
- B. PowerShell Library for HPE OneView allows scripted environment modification.
- C. HPE OneView for VMware vCenter Server will enable host profile functionality and simplify changes.
- D. HPE OneView Global Dashboard allows server profile replication and change management.
Answer: A
NEW QUESTION 35
Which statement about RoCE network restrictions is true?
- A. RoCE networks cannot be configured when Virtual Connect modules are used.
- B. RoCE networks require Virtual Connect SE 32Gb FC Modules.
- C. RoCE networks are not supported with HPE BladeSystem
- D. RoCE networks are supported only when PVLANs are enabled.
Answer: C
NEW QUESTION 36
What step must be taken to add an HPE SuperDome Flex to an existing OneView environment
- A. Each HPE Superdome Flex chassis must be added Individually using BMC IP.
- B. HPE Superdome Flex complex can be added by adding base chassis of this complex.
- C. A Rack Management Controller must be added to HPE OneView.
- D. HPE Superdome Flex can be added to HPE OneView after at least one nPAR is created.
Answer: C
NEW QUESTION 37
What is a network set?
- A. It is a collection of all internal networks defined for a specific type of traffic like vSAN or vMotion.
- B. It is a collection of all networks configured within HPE OneView regardless of network type.
- C. It is a collection of untagged Ethernet networks that form a named group to simplify server profile creation.
- D. It is a collection of tagged Ethernet networks that form a named group to simplify server profile creation.
Answer: D
NEW QUESTION 38
How can your customer implement HPE OneView so that it can be used to manage an HPE ProLiant server and HPE BladeSystem?
- A. As an application running on the server with Windows system.
- B. As an application running on the server with CentOS Linux system
- C. As a virtual appliance running on the supported hypervisor.
- D. As a physical appliance based on HPE ProLiant 360 Gen 10.
Answer: D
NEW QUESTION 39
Which statement about M-LAG setup is true?
- A. When combined with IRF, M-LAG will allow you to aggregate ports coming from clustered HPE Synergy Virtual Connect modules.
- B. M-LAG for HPE Synergy can be either single-homed or multi-homed, while for HPE BladeSystem only single-homed.
- C. sFLOW cannot be enabled if M-LAG is configured between HPE Synergy Virtual Connect modules in the same frame.
- D. M-LAG has to be defined manually for HPE BladeSystem, but it is automatically configured for HPE Synergy.
Answer: A
NEW QUESTION 40
......
HPE2-T37 EXAM DUMPS WITH GUARANTEED SUCCESS: https://www.itexamdownload.com/HPE2-T37-valid-questions.html
Best Quality HP HPE2-T37 Exam Questions: https://drive.google.com/open?id=1Ud4yVwY9RO08FemeoItGyMbzz983MvuP