[Oct-2021] Get 100% Real 301 Exam Questions, Accurate & Verified ITExamDownload Dumps in the Real Exam!
Pass Your F5 Networks Certification Study Materials Exams Fast. All Top 301 Exam Questions Are Covered.
NEW QUESTION 10
Which three statements are true about SNATs? (Choose three.)
- A. SNAT s support UDP, TCP, and ICMP traffic.
C, SNAT s provide a many-to-one mapping between IP addresses. - B. SNAT addresses can be identical to virtual server IP addresses.
- C. SNAT s provide bi-directional traffic initiation.
Answer: A,B
NEW QUESTION 11
Which statement concerning virtual servers is true?
- A. Virtual servers cannot perform load balancing without performing address translation.
- B. Virtual server processing always translates the virtual server address to the address of the chosen pool member.
- C. Virtual servers can compress data between the BIG-IP and servers.
- D. Virtual servers can reuse connections between the BIG-IP and server for multiple HTTP GETs.
- E. Virtual servers can keep idle server connections open indefinitely.
Answer: D
NEW QUESTION 12
Which two statements are true concerning capabilities of current BIG-IP platforms?
(Choose two.)
- A. The 1600 hosts more ports than the 3900.
- B. All current BIG-IP platform use both an ASIC. And CPU(s)to process traffic.
- C. All current BIG-IP platform can perform hardware compression.
- D. All BIG-IP have capacity to perform bulk encryption I decryption of SSL traffic independent of the CPU.
- E. Only 2U BIG-IP Platform have an option of a second power supply.
Answer: B,D
NEW QUESTION 13
Could an iRule perform persistence based on a cookie?
- A. Yes. An iRule could be desiged to persist based on the contents of a cookie.
- B. No. Cookie persistence is only is based on a cookie persistence profile.
- C. No. iRules cannot affect persistence.
- D. Yes An iRule could be designed to persist based on the contents of a cookie.
Answer: A
NEW QUESTION 14
When a pool is created and saved to file, where is the default file and location for the pool configuration? When a pool is created and saved to file, where is the default file and location for the pool configuration?
- A. /config/BigDB.dat
- B. /etc/bigip_base.conf
- C. /config/bigip_base.conf
- D. lconfig/bigip.conf
Answer: D
NEW QUESTION 15
What occurs when a save?command is issued?What occurs when a ? save?command is issued?
- A. The current configuration files are verified for syntax, then the running configuration is installed in memory.
- B. The current configuration files are loaded into memory.
- C. The current configuration files are backed up.
- D. The current configuration files are saved into an archive format.
Answer: C
NEW QUESTION 16
An LTM has the 3 virtual servers, 2 SNATs, four self IP addresses defined, and the networks shown in the exhibit. Selected options for each object are shown below. Settings not shown are at their defaults.
Assume port exhaustion has not been reached. Vi rtualServerl Destination: 10.10.2.102:80 netmask 255.255.255.255 Pool: Pool with 3 members in the 172.16/16 network SNAT Automap configured Vi rtualServer2 Destination: 10.10.2.102:* netmask 255.255.255.255 Pool: Pool with 3 members in the 192.168/16 network Vi rtualServer3 Destination: 10.10.2.0:80 netmask 255.255.255.0 Type: IP Forwarding SNAT1 Source IP: 10.10.0.0 netmask 255.255.0.0 SNAT Address: SNAT Pool with 2 members
172.16.20.50 and 192.168.10.50 SNAT2 Source IP: All Addresses SNATAddress:
10.10.2.102 Floating Self IPs 192.168.1.1; 172.16.1.1; 10.10.2.1; 10.10.1.1
- A. Source IP: 10.10.2.1; Destination IP: pool in the 172.16/16 network C
- B. Source IP: 10.10.2.1; Destination IP: 10.10.2.10
- C. The request will be droped.
- D. connection attempt is made with a source IP and port of 10.10.100.50:2222 and a destination IP and port of 10.10.2.10:80. When the request is processed, what will be the source and destination IP addresses?
- E. Source IP: 10.10.2.102; Destination IP 10.10.2.10
- F. Source IP: Either 172.16.20.50 or 192.168.10.50; Destination IP: 10.10.2.10
Answer: F
NEW QUESTION 17
How is traffic flow through transparent virtual servers different from typical virtual servers?
- A. the value in the tcp acknowledgement field
- B. any bytes within the initial client request packet
- C. an IP address
- D. any text string within a cookie
Answer: C,D
NEW QUESTION 18
Which three parameters could be used to determine whether a connection request will have the source address translated as the request is processed? (Choose three.)
- A. the client's IP netmask
- B. the client's IP address
- C. the client IP fragment offset
- D. the client's browser's preferred language
- E. the client's TCP port
- F. the client's router's IP address
Answer: B,D,E
NEW QUESTION 19
Which statement describes advanced shell access correctly?
Which statement describes advanced shell access correctly?
- A. The context has no impact on events.
- B. The context determines which pools are available for load balancing.
- C. The context determines which events are available for iRule processing.
- D. The context determines the values of commands that vary between client and server.
Answer: D
NEW QUESTION 20
How is traffic flow through transparent virtual servers different from typical virtual servers?
- A. Traffic flow through transparent virtual severs is not load balabced.
- B. traffic flow through transparent virtual servers must be forwarded through a single routing device.
- C. Traffic flow through transparent virtual servers is bridged ( leave IP and MAC.addresses intact) rather than routed (leave IP address intact but change the MAC.addresses).
- D. traffic flow through transparent virtual servers soes not have IP address translation performed.
Answer: D
NEW QUESTION 21
An LTM has the 3 virtual servers, four self IP addresses defined and the networks shown in the exhibit. Selected options for each object are shown below. Settings not shown are at their defaults. VirtualServerl Destination: 10.10.2.102:443 netmask 255.255.255.255 Pool: Pool with 3 members in the 172.16/16 network VirtualServer2 Destination: 10.10.2.102:* netmask 255.255.255.255 Pool: Pool with 3 members in the 192.168/16 network VirtualServer3 Destination: 10.10.2.0:80 netmask 255.255.255.0 Type: IP Forwarding SNAT1 Source IP: All Addresses SNAT Address: SNAT Pool with 2 members - 172.16.20.50 and 192.168.10.50 Self IPs 192.168.1.1; 172.16.1.1; 10.10.2.1;
10.10.1.1 A connection attempt is made with a source IP and port of 10.20.100.50:2222 and a destination IP and port of 10.10.2.102:80. When the request is processed, what will be the destination IP address?
- A. Destination IP: pool member in the 192.168/16 network
- B. Destination IP: 10.10.2.102
- C. The request will be dropped.
- D. Destination IP: pool member in the 172.16/16 network
Answer: A
NEW QUESTION 22
Which tool is used on BIG-IP systems to capture data packets?
- A. qkview
- B. tcpdump
- C. ethereal
- D. snoop
Answer: B
NEW QUESTION 23
What is the expected difference between two source address persistence profiles if profile A has a mask of 255.255.255.0 and profile B has a mask of 255.255.0.0?
- A. Profile B will have fewer persistence records for the sane client base.
- B. Profile A will have more clients matching existing persistence records.
- C. Profile B has a greater potential number of persistence records.
- D. There are no detectable differences.
Answer: A
NEW QUESTION 24
Which is the result when multiple monitors are assigned to a pool member?
- A. The member is marked available if sufficient monitors succeed, and as unavailable if insufficient monitors succeed.
- B. The member is marked as unavailable if any of the monitors fails.
- C. The member is marked as available if any of the monitors succeed.
- D. The member is marked available if all monitors succeed, and as marginal if one or more monitors fail(s).
Answer: A
NEW QUESTION 25
What occurs when a load?command is issued?What occurs when a ? load?command is issued?
- A. rootbigipsystem[Active][tmos.Itm.pool]#create pooh members add {172.16.20.1:80{priority- group 2}}
- B. rootbigipsystem[Active][tmos.Itm.pool]#create pooh members add {172.16.20.1:80{} }
- C. rootbigipsystem[Active][tmos.Itm.pool]#create pooh members add {170.16.20.1:80}
- D. rootbigipsystem[Active][tmos.Itm.pool]#create pooh members add {172.16.20.1:80}
Answer: C
NEW QUESTION 26
......
Penetration testers simulate 301 exam: https://www.itexamdownload.com/301-valid-questions.html
Free Test Engine For LTM Specialist Exam Certification Exams: https://drive.google.com/open?id=1SNdGP_EPouyyYnFeKVBJKbPtGHag-8W2