Latest [Apr 26, 2023] Realistic Verified NS0-176 Dumps
Pass Network Appliance NS0-176 Exam Updated 141 Questions
NetApp NS0-176 Exam Certification Details:
| Number of Questions | 60 |
| Duration | 60 minutes |
| Passing Score | 68% |
| Exam Price | $150 USD |
| Sample Questions | NetApp NS0-176 Sample Questions |
NEW QUESTION 29
Exhibit:
An administrator is configuring a NetApp 8-node AFF8060 system as part of a FlexPod solution and will be cabling the system based on the recommended guidelines shown in the exhibit.
Based on this information, which switch would be used for the cluster interconnect connections?
- A. NetApp CN1601
- B. NetApp CN1610
- C. Nexus 5596
- D. Nexus 5548
Answer: B
NEW QUESTION 30
Which two operating modes are available with the Nexus 9000 Series switches? (Choose two.)
- A. Cisco ACI
- B. Cisco IOS
- C. Cisco NX-OS
- D. Cisco IOS EX
Answer: A,C
NEW QUESTION 31
Which two features allow multiple fabric logins through a single port? (Choose two.)
- A. NPIV
- B. NPV
- C. LLDP
- D. vPC
Answer: A,B
NEW QUESTION 32
Exhibit:
You have a FlexPod solution with vSphere ESXi. When you click the icons shown in the exhibit, you do not see any network connectivity details.
Which Cisco UCS policy type should you create to enable visibility of these details?
- A. Link Profile Policy
- B. Link Protocol Policy
- C. LAN Connectivity Policy
- D. Network Control Policy
Answer: C
NEW QUESTION 33
You have a two-node NetApp clustered Data ONTAP storage system, a Cisco UCS system with two Fabric Interconnects, and a dual-fabric (Fabric-A and Fabric-B) Fibre Channel topology with the information shown below.
- Node 01 has one 10Gb FCoE connection to Fabric-A and one 10Gb FCoE connection to Fabric-B.
- Node 02 has one 10Gb FCoE connection to Fabric-A and one 10Gb FCoE connection to Fabric-B.
- Fabric Interconnect A has a two-port FCoE port channel to Fabric-A
- Fabric Interconnect B has a two-port FCoE port channel to Fabric-B.
- Each IOM in the Cisco UCS blade chassis has four uplinks into the Fabric Interconnects.
- A service profile running VMware ESXi has one vHBA in Fabric-A and one vHBA in Fabric-B.
How many paths should ESXi see to its FC boot LUN?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 34
Which two technologies must be deployed for a Cisco Nexus 9000 ACI design? (Choose two.)
- A. LACP
- B. APIC
- C. spine switch
- D. VSM
Answer: B,C
NEW QUESTION 35
How many cluster interconnect switch(es) are required for a 4-node NetApp cluster?
- A. 0
- B. 1
- C. 2
- D. 3
- E. 4
Answer: E
NEW QUESTION 36
Your customer needs a new Nexus switch that can support at least ten 40GbE ports, and has room for future growth. Your customer would also like the new switch to be Application Centric Infrastructure- ready.
Which switch meets these requirements?
- A. Nexus 9504
- B. Nexus 6004
- C. Nexus 7004
- D. Nexus 5672
Answer: A
NEW QUESTION 37
When installing an instance of VMware ESXi on a UCS B-Series server, where should an ISO image be loaded?
- A. From the UCS Manager select KVM Console, Select the Virtual Media tab, and select Add Image
- B. The UCS vCenter Plugin must be used
- C. ISO images should not be used
- D. Only physical install disks are supported on UCS B-Series servers
Answer: A
NEW QUESTION 38
You are creating the Gold Master Boot LUN for Windows 2012 R2 Hyper-V hosts.
In this scenario, which three steps are needed to ensure that all Hyper-V hosts will work as desired? (Choose three.)
- A. Enter in the Windows license key to activate Windows before cloning the LUN.
- B. Use Sysprep to prepare the operating system for duplication.
- C. Use a temporary service profile to install and configure the OS.
- D. Map all Hyper-V hosts to the same Gold Master Boot LUN for consistency.
- E. Disassociate the service profile before cloning the LUN.
Answer: A,C,D
NEW QUESTION 39
You installed a new NetApp cluster running clustered Data ONTAP. There is a single Storage Virtual Machine (SVM) named esx1 on the cluster.
A volume named esx_datastore1 is created in the SVM esx1. The name of the root volume for the esx1 SVM is esx1_rootvol. The default export policy was applied to the volume esx1_rootvol.
You verified that the export policy applied to esx_datastore1 contains a single rule that allows all clients to mount the volume as read/write using any version of NFS. A Linux client attempts to NFS mount the volume and receives a Permission Denied error.
In this scenario, what caused this error?
- A. NFS has not been configured on the SVM esx1.
- B. UNIX permissions for the volume esx1_rootvol are not set to read/write.
- C. The default export-policy does not have at least one rule to allow all clients read-only access.
- D. The volume esx_datastore1 has not been mounted into the namespace of the esx1 SVM.
Answer: C
NEW QUESTION 40
How many ACTIVE SPAN sessions exist on a Fabric Interconnect?
- A. 0
- B. 1
- C. 2
- D. 3
- E. 4
Answer: E
NEW QUESTION 41
A customer with several large Cisco MDS 9718 switches wants to reduce the number of total zones and the number of commands required to add devices, while still adhering to best practices.
In this scenario, which two configurations should be implemented? (Choose two.)
- A. Use the zone convert command to migrate existing zones.
- B. Use the zone copy command to migrate existing zones.
- C. Enable SMART Zoning for new VSANs.
- D. Disable SMART Zoning for new VSANs.
Answer: A,C
NEW QUESTION 42
Exhibit:
An iSCSI SAN boot is not working for a new Cisoc UCS service profile. The new vNIC template was created using the settings shown in the exhibit.
What should you do to make iSCSI SAN boot work?
- A. Specify a QoS policy.
- B. Set the iSCSI-A-VLAN as the "Native VLAN".
- C. Change the MAC pool to "<not set>".
- D. Change the vNIC template to type "Initial Template".
Answer: A
NEW QUESTION 43
What determines the size of the .vswap file for a VMware VM?
- A. the amount of RAM assigned to the VM minus the amount of RAM reserved
- B. the total amount of RAM used by the ESXi host
- C. the size of the RAM plus the log file
- D. the RAM assigned to the VM
Answer: A
NEW QUESTION 44
......
NetApp NS0-176 Exam Topics:
| Section | Objectives |
|---|---|
| FlexPod Design | - Describe the storage components supported in FlexPod - Describe the networking components supported in FlexPod - Describe the compute components supported in FlexPod |
| Information Gathering for FlexPod Solutions | - Describe the main FlexPod components |
| FlexPod Troubleshooting | - Demonstrate how to perform FlexPod troubleshooting |
Get 2023 Updated Free Network Appliance NS0-176 Exam Questions and Answer: https://www.itexamdownload.com/NS0-176-valid-questions.html