Get Latest [Oct-2021] Conduct effective penetration tests using ITExamDownload 500-220
Penetration testers simulate 500-220 exam PDF
Cisco 500-220 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 10 |
|
| Topic 11 |
|
| Topic 12 |
|
| Topic 13 |
|
NEW QUESTION 19
Which VLAN is used to source pings across the site-to-site VPN when using the MX Live tools?
- A. lowest VLAN ID that is configured and set to YES to use VPN
- B. highest VLAN ID that is configured and set to YES to use VPN
- C. highest VLAN ID that is configured and set to NO to use VPN
- D. lowest VLAN ID configured and set to NO to use VPN
Answer: B
Explanation:
Reference:
Using_the_Ping_Live_Tool
NEW QUESTION 20
Refer to the exhibit.
What does the MX Security Appliance send to determine whether VPN traffic exceeds the configured latency threshold in the VoIP custom performance class?
- A. 100-byte UDP probes every second, through VPN tunnels that are established over the primary WAN link.
- B. 1000-byte TCP probes every second, through VPN tunnels that are established over the primary WAN link.
- C. 100-byte UDP probes every second, through VPN tunnels that are established over every WAN link.
- D. 1000-byte TCP probes every second, through VPN tunnels that are established over every WAN link.
Answer: D
NEW QUESTION 21
Which three verbs of request are available in the Cisco Meraki API? (Choose three.)
- A. ADD
- B. POST
- C. PUT
- D. GET
- E. SET
- F. PATCH
Answer: B,C,D
Explanation:
Reference:
Cisco_Meraki_Dashboard_API
NEW QUESTION 22
Which Cisco Meraki product must be deployed in addition to Systems Manager so that Systems Manager Sentry enrollment can be used?
- A. MS Switch
- B. MV Smart Camera
- C. Meraki Insight
- D. MR Access Point
Answer: D
NEW QUESTION 23
Which requirement is needed to implement Fast Lane on Cisco Meraki APs?
- A. wireless profile installed on an Apple iOS device
- B. traffic shaping rule tagging traffic with a DSCP value of 46 to Apple.com
- C. adaptive 802.11r disabled
- D. wireless profile installed on a Cisco iOS access point
Answer: A
Explanation:
Reference:
Wireless_QoS_and_Fast_Lane
NEW QUESTION 24
Which two primary metrics does Meraki Insight use to calculate the Application Performance Score? (Choose two.)
- A. Maximum Latency
- B. Application Response Time
- C. Per-flow Goodput
- D. Total Bandwidth Usage
- E. Maximum Jitter
Answer: B,C
NEW QUESTION 25
What are two ways peers interact with ports that Auto VPN uses? (Choose two.)
- A. For IPsec tunneling, peers use high TCP ports within the 32768 to 61000 range.
- B. Peers contact the VPN registry at TCP port 9350.
- C. For IPsec tunneling, peers use UDP ports 500 and 4500.
- D. For IPsec tunneling, peers use high UDP ports within the 32768 to 61000 range.
- E. Peers contact the VPN registry at UDP port 9350.
Answer: A,E
Explanation:
Reference:
_Configuration_and_Troubleshooting
NEW QUESTION 26
Air Marshal has contained a malicious SSID.
What are two effects on connectivity? (Choose two.)
- A. New clients cannot connect.
- B. Currently associated clients stay connected.
- C. Currently associated clients are affected by restrictive traffic shaping rules.
- D. New clients can connect.
- E. Currently associated clients are disconnected.
Answer: A,E
NEW QUESTION 27
What occurs when a configuration change is made to an MX network that is bound to a configuration template?
- A. The template configuration overrides the configuration change in the bound network.
- B. The configuration change in the bound network is combined with the template configuration inside the template.
- C. The configuration change in the bound network overrides the template configuration.
- D. The more restrictive configuration is preferred.
Answer: B
Explanation:
Reference:
Managing_Multiple_Networks_with_Configuration_Templates
NEW QUESTION 28
Refer to the exhibit.
Which two actions are required to optimize load balancing asymmetrically with a 4:1 ratio between links? (Choose two.)
- A. Set the speed of the cellular uplink to zero.
- B. Enable load balancing.
- C. Add an internet traffic preference that defines the load-balancing ratio as 4:1.
- D. Change the assigned speeds of WAN 1 and WAN 2 so that the ratio is 4:1.
- E. Change the primary uplink to "none".
Answer: B,C
NEW QUESTION 29
What are two organization permission types? (Choose two.)
- A. Read-only
- B. Monitor-only
- C. Full
- D. Write-only
- E. Write
Answer: A,C
Explanation:
Reference:
Managing_Dashboard_Administrators_and_Permissions
NEW QUESTION 30
Refer to the exhibit.
Which design recommendation should be considered?
- A. A 50-percent throughput loss occurs for every hop. Cisco Meraki best practice recommends a 1-hop maximum.
- B. A 25-percent throughput loss occurs for every hop. Cisco Meraki best practice recommends a 2-hop maximum.
- C. A 50-percent throughput loss occurs for every hop. Cisco Meraki best practice recommends a 2-hop maximum.
- D. A 25-percent throughput loss occurs for every hop. Cisco Meraki best practice recommends a 1-hop maximum.
Answer: D
NEW QUESTION 31
What happens to an unsupervised iOS device when the "Meraki management" profile is removed?
- A. The "Meraki management" profile is removed and then pushed automatically by Systems Manager.
- B. The "Meraki management" profile cannot be removed.
- C. The "Meraki management" profile is removed. All configuration profiles that Systems Manager pushed are also removed.
- D. The "Meraki management" profile is removed. All configuration profiles that Systems Manager pushed remain.
Answer: C
NEW QUESTION 32
Refer to the exhibit.
This Dashboard organization uses Co-Termination licensing model.
What happens when an additional seven APs are claimed on this network without adding licenses?
- A. All APs stop functioning in 30 days.
- B. One AP Immediately stops functioning.
- C. All APs immediately stop functioning.
- D. All network devices stop functioning in 30 days.
Answer: D
NEW QUESTION 33
Which two actions can extend the video retention of a Cisco Meraki MV Smart Camera? (Choose two.)
- A. enabling motion-based retention
- B. enabling audio compression
- C. installing an SSD memory extension
- D. configuring a recording schedule
- E. enabling maximum retention limit
Answer: A,D
NEW QUESTION 34
Which design requirement is met by implementing syslog versus SNMP?
- A. when proactive alerts for critical events must be generated
- B. when automation capabilities are needed
- C. when organization-wide information must be collected
- D. when information such as flows and client connectivity must be gathered
Answer: D
Explanation:
Reference:
Meraki_Device_Reporting_-_Syslog%2C_SNMP%2C_and_API
NEW QUESTION 35
A Cisco Meraki MV camera is monitoring an office and its field of vision currently captures work desks and employee computer screens. However, recording employee computer screens is prohibited by local regulation.
Which feature in Dashboard can be used to preserve the current position of the camera while also meeting regulation requirements?
- A. privacy window
- B. zone exclusion
- C. area or interest
- D. restricted mode
- E. sensor crop
Answer: D
NEW QUESTION 36
Refer to the exhibit.
The VPN concentrator is experiencing issues. Which action should be taken to ensure a stable environment?
- A. Remove the connection from Internet 1.
- B. Physically disconnect all LAN ports.
- C. Add a deny any/any firewall rule to the end of the firewall rules.
- D. Configure the MX appliance to Routed mode on the Addressing & VLANS page.
Answer: B
NEW QUESTION 37
......
Tested Material Used To 500-220 Test Engine: https://www.itexamdownload.com/500-220-valid-questions.html
Steps Necessary To Pass The 500-220 Exam: https://drive.google.com/open?id=131yj2zbvFd_lVBX8GxnDci08q1_myN0c