[2022] Use Valid Exam 500-220 by ITExamDownload Books For Free Website
Free Cisco Meraki Solutions Specialist 500-220 Official Cert Guide PDF Download
NEW QUESTION 26
Which order is accurate for a firmware upgrade on MX appliances in a high-availability configuration?
- A. starts on both MX appliances at the same time and then immediately reboots both appliances
- B. starts on the secondary MX appliance and then occurs on the primary MX appliance
- C. starts on both MX appliances at the same time and then reboots both appliances after traffic on the primary MX appliance ceases
- D. starts on the primary MX appliance and then occurs on the secondary MX appliance
Answer: D
NEW QUESTION 27
A Cisco Meraki MV camera is monitoring an office and its field of vision currently captures work desks and employee computer screens. However, recording employee computer screens is prohibited by local regulation.
Which feature in Dashboard can be used to preserve the current position of the camera while also meeting regulation requirements?
- A. zone exclusion
- B. privacy window
- C. restricted mode
- D. sensor crop
- E. area or interest
Answer: C
NEW QUESTION 28
Drag and drop the settings from the left into the boxes on the right to indicate if the setting will be cloned or not cloned using the Cisco Meraki MS switch cloning feature.
Answer:
Explanation:
NEW QUESTION 29
One thousand concurrent users stream video to their laptops. A 30/70 split between 2.4 GHz and 5 GHz is used.
Based on client count, how many APs (rounded to the nearest whole number) are needed?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 30
Which Cisco Meraki product must be deployed in addition to Systems Manager so that Systems Manager Sentry enrollment can be used?
- A. MV Smart Camera
- B. MR Access Point
- C. Meraki Insight
- D. MS Switch
Answer: B
NEW QUESTION 31
Refer to the exhibit.
For an AP that displays this alert, which network access control method must be in use?
- A. preshared key
- B. WPA2-enterprise with my RADIUS server
- C. splash page with my RADIUS server
- D. MAC-based access control with RADIUS server
Answer: A
NEW QUESTION 32
Refer to the exhibit.
Assuming this MX has established a full tunnel with its VPN peer, how will the MX route the WebEx traffic?
- A. WebEx traffic will prefer WAN 2 as long as it meets the thresholds in the "Conf" performance class.
- B. WebEx traffic will prefer WAN 2 as long as it is up.
- C. WebEx traffic will prefer WAN 1 as it is the primary uplink.
- D. WebEx traffic will be load-balanced between both active WAN links.
Answer: C
NEW QUESTION 33
Which Meraki Dashboard menu section is accessed to enable Sentry enrollment on an SSID?
- A. Wireless > Configure > Firewall & Traffic Shaping
- B. Wireless > Configure > Splash page
- C. Wireless > Configure > SSIDs
- D. Wireless > Configure > Access Control
Answer: D
NEW QUESTION 34
In an organization that uses the Co-Termination licensing model, which two operations enable licenses to be applied? (Choose two.)
- A. Call Meraki support.
- B. Wait for the devices to auto-renew.
- C. License a network.
- D. Renew the Dashboard license.
- E. License more devices.
Answer: D,E
Explanation:
Reference:
Termination_Licensing_Overview
NEW QUESTION 35
A customer wants to use Microsoft Azure to host corporate application servers.
Which feature does the customer get by using a vMX appliance rather than connecting directly to Azure by VPN?
- A. next-generation firewall
- B. malware protection
- C. intrusion prevention
- D. SD-WAN
Answer: A
NEW QUESTION 36
Refer to the exhibit.
What is the minimal Cisco Meraki Insight licensing requirement?
- A. A single Meraki Insight license must be configured on network B to gain Web App Health visibility on network B.
- B. Two Meraki Insight licenses must be configured on network A to gain Web App Health visibility on network B.
- C. A single Meraki Insight license must be configured on network A to gain Web App Health visibility on network B.
- D. Two Meraki Insight licenses must be configured on network A and a single license must be configured on network B, to gain Web App Health visibility on network B.
- E. A single Meraki Insight license must be configured on network A, and a single license must be configured on network B, to gain Web App Health visibility on network B.
Answer: D
NEW QUESTION 37
Which Cisco Meraki best practice method preserves complete historical network event logs?
- A. Configuring a syslog server for the network.
- B. Configuring Dashboard logging to preserve only certain event types.
- C. Configuring the preserved event period to unlimited.
- D. Configuring the preserved event number to maximize logging.
Answer: D
NEW QUESTION 38
What are two organization permission types? (Choose two.)
- A. Full
- B. Read-only
- C. Write-only
- D. Monitor-only
- E. Write
Answer: A,B
Explanation:
Reference:
Managing_Dashboard_Administrators_and_Permissions
NEW QUESTION 39
Which information do the MXs in a High Availability pair share?
- A. DHCP association database
- B. time synchronization state
- C. stateful firewall database
- D. spanning-tree state
Answer: D
NEW QUESTION 40
Refer to the exhibit.
Which outcome occurs when logging is set to Enabled?
- A. The hits counter within this section is now enabled.
- B. Outbound flows are sent to a configured syslog server if a syslog sender is configured for flows.
- C. This firewall rule is now enabled.
- D. Inbound flows are sent to a configured syslog server if a syslog server configured for flows.
Answer: D
NEW QUESTION 41
What are two ways peers interact with ports that Auto VPN uses? (Choose two.)
- A. Peers contact the VPN registry at TCP port 9350.
- B. For IPsec tunneling, peers use high UDP ports within the 32768 to 61000 range.
- C. For IPsec tunneling, peers use UDP ports 500 and 4500.
- D. Peers contact the VPN registry at UDP port 9350.
- E. For IPsec tunneling, peers use high TCP ports within the 32768 to 61000 range.
Answer: D,E
Explanation:
Reference:
_Configuration_and_Troubleshooting
NEW QUESTION 42
A new application needs to be pushed to all iOS devices. Some devices report "NotNow" in the event log and do not install the application.
What does the "NotNow" event indicate?
- A. The device cannot connect to Cisco Meraki servers.
- B. The application requires the most recent iOS version.
- C. The device cannot connect to Apple servers.
- D. The device is locked with a passcode.
Answer: D
NEW QUESTION 43
Which two primary metrics does Meraki Insight use to calculate the Application Performance Score? (Choose two.)
- A. Per-flow Goodput
- B. Maximum Jitter
- C. Application Response Time
- D. Total Bandwidth Usage
- E. Maximum Latency
Answer: A,C
NEW QUESTION 44
How does a Meraki device behave if cloud connectivity is temporarily lost?
- A. The offline device continues to run with its last known configuration until cloud connectivity is restored.
- B. The offline device reboots every 5 minutes until connection is restored.
- C. The offline device stops passing traffic.
- D. The offline device tries to form a connection with a local backup sever.
Answer: D
NEW QUESTION 45
......
Cisco 500-220 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
Cisco 500-220 Official Cert Guide PDF: https://www.itexamdownload.com/500-220-valid-questions.html
Exam 500-220: Engineering Cisco Meraki Solutions - ITExamDownload: https://drive.google.com/open?id=131yj2zbvFd_lVBX8GxnDci08q1_myN0c