Latest Cisco 300-715 First Attempt, Exam real Dumps Updated [Nov-2024]
Get the superior quality 300-715 Dumps Questions from ITExamDownload. Nobody can stop you from getting to your dreams now. Your bright future is just a click away!
NEW QUESTION # 104
A network security engineer needs to configure 802.1X port authentication to allow a single host to be authenticated for data and another single host to be authenticated for voice. Which command should the engineer run on the interface to accomplish this goal?
- A. authentication host-mode single-host
- B. authentication host-mode multi-domain
- C. authentication host-mode multi-host
- D. authentication host-mode multi-auth
Answer: B
NEW QUESTION # 105
A network engineer is configuring guest access and notices that when a guest user registers a second device for access, the first device loses access What must be done to ensure that both devices for a particular user are able to access the guest network simultaneously?
- A. Modify the guest type to increase the number of maximum devices
- B. Use a custom portal to increase the number of logins
- C. Create an Adaptive Network Control policy to increase the number of devices
- D. Configure the sponsor group to increase the number of logins.
Answer: A
Explanation:
https://content.cisco.com/chapter.sjs?uri=/searchable/chapter/content/en/us/td/docs/security/ise/2-7/admin_guide/b_ise_admin_guide_27/b_ise_admin_guide_27_chapter_01111.html.xml
NEW QUESTION # 106
An administrator is configuring posture assessment in Cisco ISE for the first time. Which two components must be uploaded to Cisco ISE to use Secure Client for the agent configuration in a client provisioning policy? (Choose two.)
- A. SecureClientProfie.xml file
- B. Secure Client agent image
- C. Secure Client network visibility module
- D. Secure Client compliance module
- E. SecureClientProtie.xsd file
Answer: B,D
NEW QUESTION # 107
What allows an endpoint to obtain a digital certificate from Cisco ISE during a BYOD flow?
- A. My Devices Portal
- B. Supplicant Provisioning Wizard
- C. Application Visibility and Control
- D. Network Access Control
Answer: A
Explanation:
Section: BYOD
NEW QUESTION # 108
An organization wants to split their Cisco ISE deployment to separate the device administration functionalities from the mam deployment. For this to work, the administrator must deregister any nodes that will become a part of the new deployment, but the button for this option is grayed out.
Which configuration is causing this behavior?
- A. All of the nodes are actively being synched.
- B. All of the nodes participate in the PAN auto failover.
- C. One of the nodes is an active PSN.
- D. One of the nodes is the Primary PAN
Answer: D
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/ise/2-
4/admin_guide/b_ISE_admin_guide_24/m_setup_cisco_ise.html#ID185
NEW QUESTION # 109
Which two probes must be enabled for the ARP cache to function in the Cisco ISE profile service so that a user can reliably bind the IP address and MAC addresses of endpoints? (Choose two.)
- A. HTTP
- B. SNMP
- C. DHCP
- D. NetFlow
- E. RADIUS
Answer: C,E
Explanation:
Cisco ISE implements an ARP cache in the profiling service, so that you can reliably map the IP addresses and the MAC addresses of endpoints. For the ARP cache to function, you must enable either the DHCP probe or the RADIUS probe. The DHCP and RADIUS probes carry the IP addresses and the MAC addresses of endpoints in the payload data. The dhcp-requested address attribute in the DHCP probe and the Framed-IP-address attribute in the RADIUS probe carry the IP addresses of endpoints, along with their MAC addresses, which can be mapped and stored in the ARP cache.
https://www.cisco.com/c/en/us/td/docs/security/ise/2-1/admin_guide/b_ise_admin_guide_21/b_ise_admin_guide_20_chapter_010100.html
NEW QUESTION # 110
A Cisco ISE administrator must restrict specific endpoints from accessing the network while in closed mode. The requirement is to have Cisco ISE centrally store the endpoints to restrict access from.
What must be done to accomplish this task?
- A. Add each MAC address manually to a blocklist identity group and create a policy denying access
- B. Create a profiling policy for each endpoint with the cdpCacheDeviceld attribute.
- C. Create a logical profile for each device's profile policy and block that via authorization policies.
- D. Add each IP address to a policy denying access.
Answer: A
Explanation:
To accomplish this task, the Cisco ISE administrator must follow these steps:
- Create a blocklist identity group.
- Add each MAC address of the endpoints that must be restricted from accessing the network to the blocklist identity group.
- Create a policy that denies access to the blocklist identity group.
- Apply the policy to the network access devices.
NEW QUESTION # 111
Which CLI command must be configured on the switchport to immediately run the MAB process if a non-802 1X capable endpoint connects to the port?
- A. authentication fallback
- B. access-session port-control auto
- C. authentication order mab dot1x
- D. dot1x pae authenticator
Answer: C
NEW QUESTION # 112
An administrator adds a new network device to the Cisco ISE configuration to authenticate endpoints to the network. The RADIUS test fails after the administrator configures all of the settings in Cisco ISE and adds the proper configurations to the switch. What is the issue"?
- A. The shared secret is incorrect on the switch or on Cisco ISE.
- B. The certificate on the switch is self-signed not a CA-provided certificate.
- C. The endpoint does not have the appropriate credentials for network access.
- D. The endpoint profile is showing as "unknown."
Answer: C
NEW QUESTION # 113
During BYOD flow, from where does a Microsoft Windows PC download the Network Setup Assistant?
- A. Native OTA functionality
- B. Microsoft App Store
- C. Cisco ISE directly
- D. Cisco App Store
Answer: C
Explanation:
https://ciscocustomer.lookbookhq.com/iseguidedjourney/BYOD-configuration
NEW QUESTION # 114
An engineer needs to configure Cisco ISE Profiling Services to authorize network access for IP speakers that require access to the intercom system. This traffic needs to be identified if the ToS bit is set to 5 and the destination IP address is the intercom system. What must be configured to accomplish this goal?
- A. NMAP
- B. RADIUS
- C. pxGrid
- D. NETFLOW
Answer: D
NEW QUESTION # 115
Which Cisco ISE module contains a list of vendor names, product names, and attributes provided by OPSWAT?
- A. Endpoint Security Module
- B. Client Provisioning Module
- C. Posture Module
- D. Compliance Module
Answer: C
NEW QUESTION # 116
An administrator is configuring posture with Cisco ISE and wants to check that specific services are present on the workstations that are attempting to access the network. What must be configured to accomplish this goal?
- A. Create a service posture condition using a non-OPSWAT API version.
- B. Create a compound posture condition using a OPSWAT API version.
- C. Create an application posture condition using a OPSWAT API version.
- D. Create a registry posture condition using a non-OPSWAT API version.
Answer: A
NEW QUESTION # 117
A network engineer received alerts from the monitoring platform that a switch port exists with multiple sessions. RADIUS CoA using Cisco ISE must be used to address the issue. Which RADIUS CoA configuration must be used?
- A. port bounce
- B. reauth
- C. exception
- D. no CoA
Answer: B
NEW QUESTION # 118
What happens when an internal user is configured with an external identity store for authentication, but an engineer uses the Cisco ISE admin portal to select an internal identity store as the identity source?
- A. Authentication is granted.
- B. Authentication is redirected to the internal identity source.
- C. Authentication fails.
- D. Authentication is redirected to the external identity source.
Answer: C
NEW QUESTION # 119
......
Cisco Practice Test Engine with 300-715 Questions: https://drive.google.com/open?id=1M5tlWJx5cJdQwBkXzblVPw9CAJGAPpzr
Guaranteed Success with Valid Cisco 300-715 Dumps: https://www.itexamdownload.com/300-715-valid-questions.html