Oct-2023 New Version AZ-801 Certificate & Helpful Exam Dumps is Online
AZ-801 Free Certification Exam Material with 140 Q&As
NEW QUESTION # 21
The Default Domain Policy Group Policy Object (GPO) is shown in the GPO exhibit. (Click the GPO tab.)
The members of a group named Service Accounts are shown in the Group exhibit. (Click the Group tab.)
An organizational unit (OU) named ServiceAccounts is shown in the OU exhibit. (Click the OU tab.)
You create a Password Settings Object (PSO) as shown in the PSO exhibit. (Click the PSO tab.)
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/windows-server/identity/ad-ds/get-started/adac/introduction-to-active-directory-administrative-center-enhancements--level-100-#fine_grained_pswd_policy_mgmt
NEW QUESTION # 22
Your on-premises network contains two subnets. The subnets contain servers that run Windows Server as shown in the following table.
Server4 has the following IP configurations:
Ethernet adapter Ethernet:
Connection-specific DNS Suffix.:
IPv4 Address . . . . . . . . . . . : 192.168.0.10
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1
From Server4, you can ping Server1 and Server2 successfully. When you ping Server3, you get a Request timed out response.
From Server2, you can ping Server1 and Server3 successfully.
The misconfiguration of which component on Server3 can cause the Request timed out response?
- A. DNS server
- B. IP address
- C. subnet mask
- D. default gateway
Answer: C
NEW QUESTION # 23
You are planning the DHCP1 migration to support the DHCP migration plan.
Which two PowerShell cmdlets should you run on DHCP1, and which two PowerShell cmdlets should you run on DHCP2? To answer, drag the appropriate cmdlets to the correct servers. Each cmdlet may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://theitbros.com/how-to-migrate-dhcp-to-windows-server-2016/
NEW QUESTION # 24
Your network contains an Active Directory Domain Services (AD DS) domain that has the Active Directory Recycle Bin enabled. The domain contains two domain controllers named DC1 and DC2. The system state of the domain controllers is backed up daily at 23:00 by using Windows Server Backup.
You have an organizational unit (OU) named ParisUsers that contains 1,000 users.
At 08:00, DC1 shuts down for hardware maintenance. The maintenance completes, but DC1 remains shut down.
At 09:00, an administrative error causes the manager attribute of each user in ParisUsers to be deleted.
You need to recover the user account details as quickly as possible. The solution must minimize data loss.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Topic 1, Contoso, Ltd
Existing Environment
Active Directory Environment
Contoso has an on-premises Active Directory Domain Services (AD DS) domain named contoso.com that syncs with an Azure Active Directory (Azure AD) tenant. The AD DS domain contains the domain controllers shown in the following table.
Contoso recently purchased an Azure subscription.
The functional level of the forest is Windows Server 2012 R2. The functional level of the domain is Windows Server 2012. The forest has the Active Directory Recycle Bin enabled.
The contoso.com domain contains the users shown in the following table.
The contoso.com domain has the Group Policy Objects (GPOs) shown in the following table.
The contoso.com domain has the Password Settings Objects (PSOs) shown in the following table.
Server Infrastructure
The contoso.com domain contains servers that run Windows Server 2022 as shown in the following table.
By using Windows Firewall with Advanced Security, the servers have isolation connection security rules configured as shown in the following table.
Server4 has no connection security rules.
Server4 Configurations
Server4 has the effective Group Policy settings for user rights as shown in the following table.
Server4 has the disk configurations shown in the following exhibit.
Virtualization Infrastructure
The contoso.com domain has the Hyper-V failover clusters shown in the following table.
Technical Requirements
Contoso identifies the following technical requirements:
Promote a new server named DC4 that runs to Windows Server 2022 to a domain controller.
Replicate the virtual machines from Cluster2 to an Azure Recovery Services vault.
Centrally manage performance alerts in Azure for all the domain controllers.
Ensure that User1 can recover objects from the Active Directory Recycle Bin.
Migrate Share1 to Server2, including all the share and folder permissions.
Back up Server4 and all data to an Azure Recovery Services vault.
Use Hyper-V Replica to protect the virtual machines in Cluster3.
Implement BitLocker Drive Encryption (BitLocker) on Server4.
Whenever possible, use the principle of least privilege.
NEW QUESTION # 25
You have three servers named Server1, Server2, Server3 that run Windows Server and have the Hyper-V server role installed.
You plan to create a hyper-converged cluster to host Hyper-V virtual machines.
You need to ensure that you can store virtual machines in Storage Spaces Direct.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation
Graphical user interface, text, application Description automatically generated
Reference:
https://docs.microsoft.com/en-us/system-center/vmm/s2d-hyper-converged?view=sc-vmm-2019
NEW QUESTION # 26
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains a single-domain Active Directory Domain Services (AD DS) forest named contoso.com. The functional level of the forest is Windows Server 2012 R2. All domain controllers run Windows Server 2012 R2.
Sysvol replicates by using the File Replication Service (FRS).
You plan to replace the existing domain controllers with new domain controllers that will run Windows Server
2022.
You need to ensure that you can add the first domain controller that runs Windows Server 2022.
Solution: You migrate sysvol from FRS to Distributed File System (DFS) Replication.
Does this meet the goal?
- A. No
- B. Yes
Answer: B
Explanation:
Reference:
https://www.rebeladmin.com/2021/09/step-by-step-guide-active-directory-migration-from-windows-server-2008
NEW QUESTION # 27
Your network contains an Active Directory Domain Services (AD DS) domain. The domain contains the servers shown in the following table.
Server3 contains a share named Share1.
On Server1, DHCP has the following configurations:
Conflict detection attempts: 3
An IPv4 scope named Scope1 that has the following settings:
1. Address Pool: 172.16.10.100 - 172.16.10.130
2. Address Leases:
- 172.16.10.100 computer1.contoso.com
- 172.16.10.101 computer2.contoso.com
Reservations: 172.16.10.101 computer2.contoso.com
Policies: Policy1
You perform the following actions:
On Server1, you run
Export-DhcpServer -File \\Server3\Share1\File1.xml.
On Server2, you run
Import-DhcpServer -File \\Server3\Share1\File1.xml
-BackupPath \\Server3\Share1.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/powershell/module/dhcpserver/export-dhcpserver?view=windowsserver2022-ps
https://docs.microsoft.com/en-us/powershell/module/dhcpserver/import-dhcpserver?view=windowsserver2022-ps
NEW QUESTION # 28
You have three servers named Server1, Server2, Server3 that run Windows Server and have the Hyper-V server role installed.
You plan to create a hyper-converged cluster to host Hyper-V virtual machines.
You need to ensure that you can store virtual machines in Storage Spaces Direct.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/system-center/vmm/s2d-hyper-converged?view=sc-vmm-2019
NEW QUESTION # 29
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a failover cluster named Cluster1 that hosts an application named App1.
The General tab in App1 Properties is shown in the General exhibit. (Click the General tab.)
The Failover tab in App1 Properties is shown in the Failover exhibit. (Click the Failover tab.)
Server1 shuts down unexpectedly.
You need to ensure that when you start Server1, App1 continues to run on Server2.
Solution: From the Failover settings, you select Prevent failback.
Does this meet the goal?
- A. No
- B. Yes
Answer: B
Explanation:
Explanation
The Prevent failback setting will prevent the cluster failing back to Server1.
NEW QUESTION # 30
Which domain controller should be online to meet the technical requirements for DC4?
- A. DC3
- B. DC1
- C. DC2
Answer: C
NEW QUESTION # 31
You have an on-premises server named Server1 and Microsoft Sentinel instance.
You plan to collect windows Defender Firewall events from Sever1 and analyze the event data by using Microsoft Sentinel.
What should you install on Server1, and which information should you provide during the instance? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
NEW QUESTION # 32
Your network contains an Active Directory Domain Services (AD DS) domain. The domain contains a server named Server1 that runs Windows Server.
Answer:
Explanation:
NEW QUESTION # 33
You have 50 on-premises servers that run Windows Server. You have an Azure subscription that contains 50 virtual machines that run Windows Server.
You need to create an Azure Monitor alert that will be triggered if one of the servers or virtual machines has less than 10 percent available disk space.
What should you do first?
- A. Create a Log Analytics workspace and configure the Agent management settings.
- B. Create an Alert Rule
- C. Install the Azure Monitor agent on each server.
- D. Enable System Insights on each server.
Answer: B
Explanation:
https://learn.microsoft.com/en-us/answers/questions/165893/help-to-set-up-azure-alert-for-disk-space-alert-wh.h
Topic 1, Contoso, Ltd
Case study
This is a case study. Case studies are not timed separately. You can use as much exam time as you would like to complete each case. However, there may be additional case studies and sections on this exam. You must manage your time to ensure that you are able to complete all questions included on this exam in the time provided.
To answer the questions included in a case study, you will need to reference information that is provided in the case study. Case studies might contain exhibits and other resources that provide more information about the scenario that is described in the case study. Each question is independent of the other questions in this case study.
At the end of this case study, a review screen will appear. This screen allows you to review your answers and to make changes before you move to the next section of the exam. After you begin a new section, you cannot return to this section.
To start the case study
To display the first question in this case study, click the Next button. Use the buttons in the left pane to explore the content of the case study before you answer the questions. Clicking these buttons displays information such as business requirements, existing environment, and problem statements. If the case study has an All Information tab, note that the information displayed is identical to the information displayed on the subsequent tabs. When you are ready to answer a question, click the Question button to return to the question.
Overview
Contoso, Ltd. is a manufacturing company that has a main office in Seattle and branch offices in Los Angeles and Montreal.
Existing Environment
Active Directory Environment
Contoso has an on-premises Active Directory Domain Services (AD DS) domain named contoso.com that syncs with an Azure Active Directory (Azure AD) tenant. The AD DS domain contains the domain controllers shown in the following table.
Contoso recently purchased an Azure subscription.
The functional level of the forest is Windows Server 2012 R2. The functional level of the domain is Windows Server 2012. The forest has the Active Directory Recycle Bin enabled.
The contoso.com domain contains the users shown in the following table.
The contoso.com domain has the Group Policy Objects (GPOs) shown in the following table.
The contoso.com domain has the Password Settings Objects (PSOs) shown in the following table.
Server Infrastructure
The contoso.com domain contains servers that run Windows Server 2022 as shown in the following table.
By using Windows Firewall with Advanced Security, the servers have isolation connection security rules configured as shown in the following table.
Server4 has no connection security rules.
Server4 Configurations
Server4 has the effective Group Policy settings for user rights as shown in the following table.
Server4 has the disk configurations shown in the following exhibit.
Virtualization Infrastructure
The contoso.com domain has the Hyper-V failover clusters shown in the following table.
Technical Requirements
Contoso identifies the following technical requirements:
* Promote a new server named DC4 that runs to Windows Server 2022 to a domain controller.
* Replicate the virtual machines from Cluster2 to an Azure Recovery Services vault.
* Centrally manage performance alerts in Azure for all the domain controllers.
* Ensure that User1 can recover objects from the Active Directory Recycle Bin.
* Migrate Share1 to Server2, including all the share and folder permissions.
* Back up Server4 and all data to an Azure Recovery Services vault.
* Use Hyper-V Replica to protect the virtual machines in Cluster3.
* Implement BitLocker Drive Encryption (BitLocker) on Server4.
* Whenever possible, use the principle of least privilege.
NEW QUESTION # 34
You are planning the deployment of Microsoft Sentinel.
Which type of Microsoft Sentinel data connector should you use to meet the security requirements?
- A. Microsoft Defender for Identity
- B. Threat Intelligence - TAXII
- C. Microsoft Defender for Cloud
- D. Azure Active Directory
Answer: A
Explanation:
Reference:
https://docs.microsoft.com/en-us/defender-for-identity/cas-isp-legacy-protocols
NEW QUESTION # 35
You have two physical servers named AppSrv1 and AppSrv2 and an unconfigured server named Server1. All the servers run Windows Server. Only Server1 can access the internet.
You plan to use Azure Site Recovery to replicate AppSrv1 and AppSrv2 to Azure.
You need to deploy the required components to AppSrv1, AppSrv2, and Server1.
Which components should you deploy? To answer, drag the appropriate components to the correct servers.
Each component may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
Graphical user interface, text, application Description automatically generated
Reference:
https://docs.microsoft.com/en-us/azure/site-recovery/physical-azure-architecture
https://docs.microsoft.com/en-us/azure/site-recovery/physical-azure-set-up-source
NEW QUESTION # 36
You need to create a Hyper-V hyper-converged cluster that stores virtual machines by using Storage Spaces Owed Which three actions should you perform in sequence? To answer, move the appropriate anions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation
NEW QUESTION # 37
You have two Azure virtual networks named Vnet1 and Vnet2.
You have a Windows 10 device named Client1 that connects to Vnet1 by using a Point-to-Site (P2S) IKEv2 VPN.
You implement virtual network peering between Vnet1 and Vnet2. Vnet1 allows gateway transit Vnet2 can use the remote gateway.
You discover that Client1 cannot communicate with Vnet2.
You need to ensure that Client1 can communicate with Vnet2.
Solution: You download and reinstall the VPN client configuration.
Does this meet the goal?
- A. No
- B. Yes
Answer: B
NEW QUESTION # 38
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 39
......
The AZ-801 exam is intended for IT professionals who have experience working with Windows Server technologies and want to expand their skills into hybrid cloud environments. It is also suitable for IT professionals who are already working with Azure and want to validate their skills in hybrid scenarios.
Get The Important Preparation Guide With AZ-801 Dumps: https://www.itexamdownload.com/AZ-801-valid-questions.html
UPDATED AZ-801 Exam Questions Certification Test Engine to PDF: https://drive.google.com/open?id=1yzPjmtZ5eJAFw1MFjbs4wK-9d__HQMpQ