[Nov 21, 2021] Fully Updated NSE5_FAZ-6.2 Dumps - 100% Same Q&A In Your Real Exam
Latest NSE5_FAZ-6.2 Exam Dumps - Valid and Updated Dumps
Fortinet NSE 5 - FortiAnalyzer (NSE5 FAZ-6.2) Exam Certification Path
The Fortinet Network Security Expert (NSE) program is an eight-level training and certification program designed to provide objective confirmation of your network security expertise and knowledge to interested technical professionals. A broad range of self-paced and instructor-led courses are included in the NSE curriculum, as well as realistic, experiential activities that demonstrate mastery of complex concepts of network security.
For the Network Security Analyst, candidates must complete only 2 exams from the available five options. These exams are listed below:
- Fortinet NSE 5 - FortiSIEM
- Fortinet NSE 5 - FortiClient-EMS
- Fortinet NSE 5 - FortiEDR (coming soon)
- Fortinet NSE 5 - FortiManager
- Fortinet NSE 5 - FortiAnalyzer
Prerequisites for the exam include familiarity with all topics presented in FortiGate Security and FortiGate Infrastructure and Knowledge of SQL SELECT syntax.
NEW QUESTION 12
What happens when a log file saved on FortiAnalyzer disks reaches the size specified in the device log settings?
- A. The log file is purged from the database.
- B. The log file is stored as a raw log and is available for analytic support.
- C. The log file rolls over and is archived.
- D. The log file is overwritten.
Answer: C
NEW QUESTION 13
Which two methods can you use to send event notifications when an event occurs that matches a configured event handler? (Choose two.)
- A. SNMP
- B. IM
- C. SMS
- D. Email
Answer: A,D
NEW QUESTION 14
Which two constraints can impact the amount of reserved disk space required by FortiAnalyzer? (Choose two.)
- A. License type
- B. Total quota
- C. RAID level
- D. Disk size
Answer: C,D
NEW QUESTION 15
Which two of the following must you configure on FortiAnalyzer to email a FortiAnalyzer report externally?
(Choose two.)
- A. Report scheduling
- B. Output profile
- C. SFTP server
- D. Mail server
Answer: B,C
Explanation:
Explanation/Reference: https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/6d9f8fb5-6cf4-11e9-
81a4-00505692583a/FortiAnalyzer-6.0.5-Administration-Guide.pdf (119)
NEW QUESTION 16
FortiAnalyzer uses the Optimized Fabric Transfer Protocol (OFTP) over SSL for which purpose?
- A. To upload logs to an SFTP server
- B. To prevent log modification during backup
- C. To encrypt log communication between devices
- D. To send an identical set of logs to a second logging server
Answer: D
Explanation:
Explanation/Reference: https://docs.fortinet.com/document/fortigate/6.4.0/ports-and-protocols/109281/oftp-optimized- fabric-transfer-protocol#:~:text=The%20Optimized%20Fabric%20Transfer%20Protocol,and%2For%
20FortiManager)%20unit.
NEW QUESTION 17
In the FortiAnalyzer FortiView, source and destination IP addresses from FortiGate devices are not resolving to a hostname.
How can you resolve the source and destination IP addresses, without introducing any additional performance impact to FortiAnalyzer?
- A. Configure # set resolve-ip enable in the system FortiView settings
- B. Configure local DNS servers on FortiAnalyzer
- C. Resolve IP addresses on FortiGate
- D. Resolve IP addresses on a per-ADOM basis to reduce delay on FortiView while IPs resolve
Answer: A
Explanation:
Explanation/Reference: https://forum.fortinet.com/tm.aspx?m=156950
NEW QUESTION 18
What is the purpose of employing RAID with FortiAnalyzer?
- A. To introduce redundancy to your log data
- B. To back up your logs
- C. To provide data separation between ADOMs
- D. To separate analytical and archive data
Answer: A
NEW QUESTION 19
Which two purposes does the auto cache setting on reports serve? (Choose two.)
- A. It reduces the log insert lag rate.
- B. It provides diagnostics on report generation time.
- C. It automatically updates the hcache when new logs arrive.
- D. It reduces report generation time.
Answer: C,D
Explanation:
Reference:
https://docs.fortinet.com/document/fortianalyzer/6.2.5/administration-guide/384416/how-auto-cache-works
https://docs.fortinet.com/document/fortianalyzer/6.2.5/administration-guide/86926/enabling-auto-cache
NEW QUESTION 20
On the RAID management page, the disk status is listed as Initializing.
What does the status Initializing indicate about what the FortiAnalyzer is currently doing?
- A. FortiAnalyzer is functioning normally
- B. FortiAnalyzer is writing to all of its hard drives to make the array fault tolerant
- C. FortiAnalyzer is writing data to a newly added hard drive to restore it to an optimal state
- D. FortiAnalyzer is ensuring that the parity data of a redundant drive is valid
Answer: B
Explanation:
Reference:
8977-00505692583a/FortiAnalyzer-5.6.10-Administration-Guide.pdf (40)
NEW QUESTION 21
You are using RAID with a FortiAnalyzer that supports software RAID, and one of the hard disks on FortiAnalyzer has failed.
What is the recommended method to replace the disk?
- A. Perform a hot swap
- B. Clear all RAID alarms and replace the disk while FortiAnalyzer is still running
- C. Downgrade your RAID level, replace the disk, and then upgrade your RAID level
- D. Shut down FortiAnalyzer and then replace the disk
Answer: D
Explanation:
NEW QUESTION 22
In FortiAnalyzer's FormView, source and destination IP addresses from FortiGate devices are not resolving to a hostname. How can you resolve the source and destination IPs, without introducing any additional performance impact to FortiAnalyzer?
- A. Resolve IPs on FortiGate
- B. Configure # set resolve-ip enable in the system FortiView settings
- C. Configure local DNS servers on FortiAnalyzer
- D. Resolve IPs on a per-ADOM basis to reduce delay on FortiView while IPs resolve
Answer: A
NEW QUESTION 23
Which statements are true regarding securing communications between FortiAnalyzer and FortiGate with IPsec? (Choose two.)
- A. Must establish an IPsec tunnel ID and pre-shared key.
- B. IPsec is only enabled through the CLI on FortiAnalyzer.
- C. Must configure the FortiAnalyzer end of the tunnel only--the FortiGate end is auto-negotiated.
- D. IPsec cannot be enabled if SSL is enabled as well.
Answer: D
NEW QUESTION 24
View the Exhibit:
Why is the total quota less than the total system storage?
- A. The oftpd process has not archived the logs yet
- B. The logfiled process is just estimating the total quota
- C. 3.6% of the system storage is already being used.
- D. Some space is reserved for system use, such as storage of compression files, upload files, and temporary report files
Answer: D
NEW QUESTION 25
What are the operating modes of FortiAnalyzer? (Choose two)
- A. Analyzer
- B. Collector
- C. Manager
- D. Standalone
Answer: A,B
NEW QUESTION 26
What are two advantages of setting up fabric ADOM? (Choose two.)
- A. It can include all Fortinet devices that are part of the same Security Fabric
- B. It can be used to facilitate communication between devices in same Security Fabric
- C. It can include only FortiGate devices that are part of the same Security Fabric
- D. It can be used for fast data processing and log correlation
Answer: C,D
NEW QUESTION 27
You need to upgrade your FortiAnalyzer firmware.
What happens to the logs being sent to FortiAnalyzer from FortiGate during the time FortiAnalyzer is temporarily unavailable?
- A. FortiAnalyzer uses log fetching to retrieve the logs when back online
- B. Logs are dropped
- C. The logfiled process stores logs in offline mode
- D. FortiGate uses the miglogd process to cache the logs
Answer: D
NEW QUESTION 28
How can you configure FortiAnalyzer to permit administrator logins from only specific locations?
- A. Use administrative profiles
- B. Use secure protocols
- C. Use static routes
- D. Use trusted hosts
Answer: D
Explanation:
https://docs.fortinet.com/document/fortianalyzer/6.2.5/administration-guide/186508/trusted-hosts
NEW QUESTION 29
You need to upgrade your FortiAnalyzer firmware.
What happens to the logs being sent to FortiAnalyzer from FortiGate during the time FortiAnalyzer is temporarily unavailable?
- A. FortiAnalyzer uses log fetching to retrieve the logs when back online
- B. Logs are dropped
- C. The logfiled process stores logs in offline mode
- D. FortiGate uses the miglogd process to cache the logs
Answer: D
Explanation:
NEW QUESTION 30
What is the purpose of the following CLI command?
- A. To add a log file checksum
- B. To add the MD's hash value and authentication code
- C. To encrypt log communications
- D. To add a unique tag to each log to prove that it came from this FortiAnalyzer
Answer: A
NEW QUESTION 31
......
Free Sales Ending Soon - 100% Valid NSE5_FAZ-6.2 Exam: https://www.itexamdownload.com/NSE5_FAZ-6.2-valid-questions.html