[Jan 11, 2024] Free Microsoft Certified: Azure Network Engineer Associate AZ-700 Exam Question [Q60-Q76]

[Jan 11, 2024] Free Microsoft Certified: Azure Network Engineer Associate AZ-700 Exam Question

AZ-700 dumps & Microsoft Certified: Azure Network Engineer Associate sure practice dumps

Microsoft AZ-700 exam is designed for professionals who want to validate their skills and knowledge in designing and implementing Microsoft Azure networking solutions. AZ-700 exam is intended for candidates who have experience in networking and want to specialize in cloud-based solutions. AZ-700 exam covers a broad range of topics related to Azure networking, including virtual networks, load balancing, network security, and hybrid connectivity.

NEW QUESTION # 60
You have the Azure environment shown In the Azure Environment exhibit. (Click the Azure Environment tab.) The settings for each subnet are shown in the following table.

The Firewalls and virtual networks settings for storage1 are configured as shown in the Storage1 exhibit. (Click the Storage1 tab.) For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.

Answer:

Explanation:

NEW QUESTION # 61
You have an Azure application gateway for a web app named App1. The application gateway allows end-to-end encryption.
You configure the listener for HTTPS by uploading an enterprise signed certificate.
You need to ensure that the application gateway can provide end-to-end encryption for App1. What should you do?

A. Enable the SSL profile for the listener.
B. Upload the public key certificate to the HTTPS settings.
C. Set Listener type to Multi site.
D. Increase the Unhealthy threshold setting in the custom probe.

Answer: B

Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/application-gateway/end-to-end-ssl-portal
https://docs.microsoft.com/en-us/azure/application-gateway/create-ssl-portal#configuration-tab

NEW QUESTION # 62
You have the Azure load balancer shown in the Load Balancer exhibit.

LB2 has the backend pools shown in the Backend Pools exhibit.

You need to ensure that LB2 distributes traffic to all the members of VMSS1.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

A. Configure a health probe.
B. Add a public IP address to each member of VMSS1.
C. Add a load balancing rule.
D. Add a network interface to VMSS1.

Answer: A,C

Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/load-balancer/quickstart-load-balancer-standard-public-portal?tabs=optio

NEW QUESTION # 63
Your company has an Azure virtual network named Vnet1 that uses an IP address space of 192.168.0.0/20. Vnet1 contains a subnet named Subnet1 that uses an IP address space of 192.168.0.0/24.
You create an IPv6 address range to Vnet1 by using a CIDR suffix of /48.
You need to enable the virtual machines on Subnet1 to communicate with each other by using IPv6 addresses assigned by the company. The solution must minimize the number of additional IPv4 addresses.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Reference:
https://docs.microsoft.com/en-us/azure/virtual-network/ipv6-overview
https://docs.microsoft.com/en-us/azure/virtual-network/ipv6-add-to-existing-vnet-powershell

NEW QUESTION # 64
You need to connect an on-premises network and art Azure environment. The solution must use ExpressRoute and support failing over to a Site-to Site VPN connection if there is an ExpressRoute failure.
What should you configure? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

NEW QUESTION # 65
You have an Azure subscription that contains two virtual networks named Vnet1 and Vnet2.
You register a public DNS zone named fabrikam.com. The zone is configured as shown in the Public DNS Zone exhibit.

You have a private DNS zone named fabrikam.com. The zone is configured as shown in the Private DNS Zone exhibit.

You have a virtual network link configured as shown in the Virtual Network Link exhibit.

For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Explanation
Graphical user interface, text, application, email Description automatically generated

Box 1: Yes
DNS queries from the internet use the public DNS zone. In the public DNS zone, www.fabrikam.com is a CNAME record that resolves to appservice1.fabrikam.com which resolves to 131.107.1.1.
Box 2: No
DNS queries from the internet use the public DNS zone. There is no DNS record for server1.fabrikam.com in the public DNS zone.
Box 3: No
The private DNS zone is linked to VNet1, not VNet2. Therefore, resources in VNet2 cannot query the private DNS zone.

NEW QUESTION # 66
You have an Azure virtual network named Vnet1 that contains two subnets named Subnet1 and Subnet2.
You have the NAT gateway shown in the NATgateway1 exhibit.

You have the virtual machine shown in the VM1 exhibit.

Subnet1 is configured as shown in the Subnet1 exhibit.

For each of the following statements, select Yes of the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Explanation
Graphical user interface, text, application Description automatically generated

Box 1: No
VM1 is in Zone2 whereas the NAT Gateway is in Zone1. The VM would need to be in the same zone as the NAT Gateway to be able to use it. Therefore, VM1 cannot use the NAT gateway.
Box 2: Yes
NATgateway1 is configured in the settings for Subnet2.
Box 3: No
The NAT gateway does not have a single public IP address, it has an IP prefix which means more than one IP address. The VMs the use the NAT Gateway can use different public IP addresses contained within the IP prefix.
Reference:
https://docs.microsoft.com/en-us/azure/virtual-network/nat-gateway/nat-gateway-resource

NEW QUESTION # 67
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it as a result, these questions will not appear in the review screen.
You have an Azure subscription that contains an Azure Front Door Premium profile named AFD1 and an Azure Web Application Firewall (WAF) policy named WAF1. AFD1 is associated with WAFT.
You need to configure a rate limit for incoming requests to AFD1.
Solution: You configure a custom rule for WAF1.
Does this meet the goal?

A. Yes
B. No

Answer: A

NEW QUESTION # 68
Your company has 10 instances of a web service. Each instance is hosted in a different Azure region and is accessible through a public endpoint.
The development department at the company is creating an application named App1. Every 10 minutes. App1 will use a list of end points and connect to the first available endpoint.
You plan to use Azure Traffic Manager to maintain the list of endpoints.
You need to configure a Traffic Manager profile that will minimize the impact of DNS caching.
What should you configure? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Reference:
https://docs.microsoft.com/en-us/azure/traffic-manager/traffic-manager-routing-methods
https://docs.microsoft.com/en-us/azure/traffic-manager/traffic-manager-endpoint-types

NEW QUESTION # 69
You have the Azure virtual networks shown in the following table.

You deploy Azure Firewall to Vnet3.
You need to ensure that the traffic from Subnet1-1 to Subnet2-1 passes through the firewall. What should you configure?

A. peering links between Vnet1 and Vnet2
B. an Azure private DNS zone
C. a route table associated to AzureFitewallSubnet
D. a route table associated to Subnet1 -1 and Subnet2-1

Answer: C

NEW QUESTION # 70
You have an Azure Front Door instance that provides access to a web app. The web app uses a hostname of www.contoso.com.
You have the routing rules shown in the following table.

Which rule will apply to each incoming request? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point

Answer:

Explanation:

Reference:
https://docs.microsoft.com/en-us/azure/frontdoor/front-door-route-matching

NEW QUESTION # 71
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure application gateway that has Azure Web Application Firewall (WAF) enabled.
You configure the application gateway to direct traffic to the URL of the application gateway.
You attempt to access the URL and receive an HTTP 403 error. You view the diagnostics log and discover the following error.

You need to ensure that the URL is accessible through the application gateway.
Solution: You create a WAF policy exclusion request headers that contain 137.135.10.24.
Does this meet the goat?

A. Yes
B. No

Answer: B

NEW QUESTION # 72
You have an Azure subscription that contains the public IP addresses shown in the following table.

You plan to deploy a NAT gateway named NAT1.
Which public IP addresses can be used as the public IP address for NAT1?

A. IP5 only
B. IP1, IP3, and IP5 only
C. IP3 and IP5 only
D. IP2 and IP4 only
E. IP3 only

Answer: E

Explanation:
Explanation
Only static IPv4 addresses in the Standard SKU are supported. IPv6 doesn't support NAT.
Reference:
https://docs.microsoft.com/en-us/azure/virtual-network/nat-gateway/nat-overview

NEW QUESTION # 73
You have an Azure load balancer that has the following configurations:
* Name:LB1
* Location: East US 2
* SKU: Standard
* Private IP address: 10.3.0.7
* Load balancing rule: rule! (Tcp/80)
* Health probe: probe1 (Http:80)
* NAT rules; 0 inbound
The backend pool of LB1 has the following configurations:
* Name: backend I
* Virtual network: Vnet1
* Backend pool configuration: NIC
* IP version: IPv4
* Virtual machines: VM1.VM2. VM3:
You have an Azure virtual machine named VM4 that has the following network configurations:
* Network interface: vm49Sl
* Virtual network/subnet: Vnet3/Subnet3
* NIC private IP address: 10.4.0.4
* Accelerated networking: Enabled
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Explanation

NEW QUESTION # 74
You have two Azure App Service instances that host the web apps shown the following table.

You deploy an Azure application gateway that has one public frontend IP address and two backend pools.
You need to publish all the web apps to the application gateway. Requests must be routed based on the HTTP host headers.
What is the minimum number of listeners and routing rules you should configure? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

A. See in Explanation

Answer: A

Explanation:
1, 2

NEW QUESTION # 75
You need to implement a P2S VPN for the users in the branch office. The solution must meet the hybrid networking requirements.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.