Get Latest [Jan-2022] Conduct effective penetration tests using ITExamDownload JN0-635
Penetration testers simulate JN0-635 exam PDF
Juniper JN0-635 Exam Certification Details:
| Number of Questions | 65 |
| Exam Code | JN0-635 JNCIP-SEC |
| Exam Registration | PEARSON VUE |
| Recommended Training | Advanced Juniper Security |
| Passing Score | Variable (60-70% Approx.) |
| Exam Name | Security Professional |
| Sample Questions | Juniper JN0-635 Sample Questions |
| Duration | 120 minutes |
| Exam Price | $400 USD |
Recertification Details
You can recertify for the JNCIP-SEC through testing by passing the relevant professional-level exam, by nailing the expert-level exam to advance the certification level, or by attending courses by Juniper Networks or any Juniper Networks Authorized Education Partners. If you pass an exam or take a course that is at a higher level than the certification you opt to recertify, you can renew all lower-level designations within that certification track. For example, if you recertify the expert-level JNCIE-SEC certification either through testing or by a course, you would have effectively recertified the lower-level security certificates including the JNCIP-SEC, JNCIS-SEC, and JNCIA-SEC. This recertification is valid for another three years from the time you passed the recertification exam or course. If you fail to recertify by the end of the active period, you will have to re-earn the certification from scratch.
NEW QUESTION 28
Exhibit.
Referring to the exhibit, a spoke member of an ADVPN is not functioning correctly.
Which two commands will solve this problem? (Choose two.)
- A. [edit interfaces]
user@srx# delete st0.0 multipoint - B. [edit security ike gateway advpn-gateway]
user@srx# set advpn suggester disable - C. [edit security ike gateway advpn-gateway]
user@srx# set version v1-only - D. [edit security ike gateway advpn-gateway]
user@srx# delete advpn partner
Answer: B,D
Explanation:
Reference:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-auto-discovery-vpns.html
NEW QUESTION 29
Click the Exhibit button.
Given the command output shown in the exhibit, which two statements are true? (Choose two.)
- A. The host 10.10.101.10 is directly connected to interface ge-0/0/4.0
- B. Network Address Translation is applied to this session
- C. Traffic matching this session has been received since the session was established
- D. The host 172.31.15.1 is directly connected to interface ge-0/0/3.0
Answer: A,C
NEW QUESTION 30
Click the Exhibit button.
Which statement is correct regarding the information show in the exhibit?
- A. The tunnel binding was discovered automatically
- B. The tunnel gateway address was automatically discovered
- C. The tunnel is not encrypting the traffic
- D. The output is for an ADVPN
Answer: D
NEW QUESTION 31
Click the Exhibit button.
Which type of NAT is shown in the exhibit?
- A. persistent NAT
- B. NAT46
- C. NAT64
- D. DS-Lite
Answer: C
Explanation:
Explanation/Reference:
NEW QUESTION 32
Click the Exhibit button.
A host is unable to communicate with a webserver. Referring to the exhibit, which statement is correct?
- A. A session is created for this flow
- B. The webserver is not listening for traffic on port 80
- C. The session table is running out of resources
- D. A policy is denying the traffic between these two hosts
Answer: D
NEW QUESTION 33
Click the Exhibit button.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The SRX Series device is not enrolled but can communicate with the JATP Appliance
- B. The JATP Appliance cannot download the security feeds from the GSS servers
- C. The SRX Series device is enrolled and communicating with a JATP Appliance
- D. The SRX Series device cannot download the security feeds from the JATP Appliance
Answer: A,D
NEW QUESTION 34
You have a remote access VPN where the remote users are using the NCP client. The remote users can access the internal corporate resources as intended; however, traffic that is destined to all other Internet sites is going through the remote access VPN. You want to ensure that only traffic that is destined to the internal corporate resources use the remote access VPN.
Which two actions should you take to accomplish this task? (Choose two.)
- A. Enable IKEv2 within the VPN configuration on the SRX Series device
- B. Enable the split tunneling feature within the VPN configuration on the SRX Series device
- C. Configure split tunneling on the NCP profile on the remote client
- D. Configure the necessary traffic selectors within the VPN configuration on the SRX Series device
Answer: C,D
NEW QUESTION 35
Click the Exhibit button.
Referring to the exhibit, you are attempting to enable IPsec power mode to improve IPsec VPN performance.
However, you are unable to use IPsec power mode.
What is the problem?
- A. IPsec power mode cannot be used with advanced services
- B. IPsec power mode cannot be used with IPsec performance acceleration
- C. IPsec power mode requires that you configure a policy-based VPN
- D. IPsec power mode cannot be used with high IPsec maximum segment size values
Answer: A
NEW QUESTION 36
Click the Exhibit button.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. You can secure inter-VLAN traffic with a security policy on this device
- B. You can secure intra-VLAN traffic with a security policy on this device
- C. The device cannot pass Layer 2 and Layer 3 traffic at the same time
- D. The device can pass Layer 2 and Layer 3 traffic at the same time
Answer: B,C
Explanation:
Explanation/Reference: https://www.juniper.net/documentation/en_US/junos/topics/topic-map/ethernet-port-switching- modes.html
NEW QUESTION 37
Click the Exhibit button.
Referring to the exhibit, which three types of traffic would be examined by the IPS policy between Switch-1 and Switch-2? (Choose three.)
- A. ICMP
- B. TCP
- C. UDP
- D. ARP
- E. LLDP
Answer: A,B,C
NEW QUESTION 38
You correctly configured a security policy to deny certain traffic, but logs reveal that traffic is still allowed.
Which specific traceoption flag will help you troubleshoot this problem?
- A. rules
- B. routing-socket
- C. configuration
- D. lookup
Answer: A
NEW QUESTION 39
You correctly configured a security policy to deny certain traffic, but logs reveal that traffic is still allowed.
Which specific traceoption flag will help you troubleshoot this problem?
- A. rules
- B. routing-socket
- C. configuration
- D. lookup
Answer: D
NEW QUESTION 40
You have designed the firewall filter shown in the exhibit to limit SSH control traffic to yours SRX Series device without affecting other traffic.
Which two statement are true in this scenario? (Choose two.)
- A. Applying the filter will not achieve the desired result.
- B. Applying the filter will achieve the desired result.
- C. The filter should be applied as an output filter on the loopback interface.
- D. The filter should be applied as an input filter on the loopback interface.
Answer: A,D
Explanation:
Reference:
https://www.juniper.net/documentation//en_US/junos/topics/concept/firewall-filter-ex-series-evaluation-understanding.html
NEW QUESTION 41
Click the Exhibit button.
A host is unable to communicate with a webserver. Referring to the exhibit, which statement is correct?
- A. A session is created for this flow
- B. The webserver is not listening for traffic on port 80
- C. The session table is running out of resources
- D. A policy is denying the traffic between these two hosts
Answer: D
NEW QUESTION 42
In a Juniper ATP Appliance, what would be a reason for the mitigation rule to be in the failed-remove state?
- A. The Juniper ATP Appliance was not able to communicate with the SRX Series device
- B. The Juniper ATP Appliance received an unknown error message from the SRX Series device
- C. The Juniper ATP Appliance received a commit error message from the SRX Series device
- D. The Juniper ATP Appliance was not able to obtain the config lock
Answer: D
NEW QUESTION 43
You have configured three logical tunnel interfaces in a tenant system on an SRX1500 device. When committing the configuration, the commit fails.
In this scenario, what would cause this problem?
- A. The SRX1500 device requires a tunnel PIC to allow for logical tunnel interfaces
- B. There is no GRE tunnel between the tenant system and master system allowing SSH traffic
- C. The SRX1500 device does not support more than two logical interfaces per tenant system
- D. There is no VPLS switch on the tenant system containing a peer It-0/0/0 interface
Answer: D
NEW QUESTION 44
You have a remote access VPN where the remote users are using the NCP client. The remote users can access the internal corporate resources as intended; however, traffic that is destined to all other Internet sites is going through the remote access VPN. You want to ensure that only traffic that is destined to the internal corporate resources use the remote access VPN.
Which two actions should you take to accomplish this task? (Choose two.)
- A. Enable IKEv2 within the VPN configuration on the SRX Series device
- B. Enable the split tunneling feature within the VPN configuration on the SRX Series device
- C. Configure split tunneling on the NCP profile on the remote client
- D. Configure the necessary traffic selectors within the VPN configuration on the SRX Series device
Answer: C,D
Explanation:
Explanation/Reference: https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-remote-access- vpns-with-ncp-exclusive-remote-access-client.html
NEW QUESTION 45
......
Tested Material Used To JN0-635 Test Engine: https://www.itexamdownload.com/JN0-635-valid-questions.html
Steps Necessary To Pass The JN0-635 Exam: https://drive.google.com/open?id=1lYWwn4UUAxEcWgH34jMj94a9bgPFxMWu